I have a question about connection of AD9152 and ADL5375. Can AD9152 be connected to ADL5375 without DC cut capacitor? If yes, could you please advise me the circuit of that?
AD9152 supporting 2.7V common mode output, while ADL5375 work for 0.5V or 1.5V common mode. AD9152 is good to support ADRF6720 modulator, which you can find the evb schematic as below：ftp://ftp.analog.com/pub/HSSP_SW/HSCDAC/Documents/AD9152/AD9152-ADRF6720-EBZ%20RevB%20Schematic.pdf
I see in CN0205:
And I think that some of the DACs suggested in the figure 1 should not be all the chips, and some of the DAC chips are not shown in the figure above. Just like adl5375's data sheet(figure 2), several DACs are not listed in the figure 1. recommendation.
figure 2 ，some DACs in the data sheet of ADL5375
And in AD9152:The full-scale output current can be programmed over a range of 4 mA to 20 mA.
Since the ad9152 can output 20 mA of full scale current. Why can't ad9152 connect with adl5375-5.