my AD9747 Evaluation Board cannot run. Which PIC18F4550 clock does not work.As a result, the USB interface cannot work, so the entire development board cannot be set
AD9747
Production
The AD9743/AD9745/AD976/AD9747 are pin-compatible, high dynamic range, dual digital-to-analog converters (DACs) with 10-/12-/14-/16-bit resolutions and...
Datasheet
AD9747 on Analog.com
my AD9747 Evaluation Board cannot run. Which PIC18F4550 clock does not work.As a result, the USB interface cannot work, so the entire development board cannot be set
Does the blue LED on the board light up when you plug in the mini USB to the board and connect it to your PC?
Do you have the +5V and Ground supply connected to the evaluation board from an external power supply?
the blue LED of the board does not light up when I plug in the miniUSB to the board and connect it to my PC, I connected the +5V and Ground to the evaluation board from an external power supply.
The local technical support judged that there was no program written on the development board.
Can you provide me with the source program or programming code of PIC18F4550?
Assumed answered offline. Let us know if that is not the case by re-posting to start a new thread.
Hello,
We are working on the same product AD9746-DPG2-EBZ + AD-DAC-FMC-ADP + EVAL-SDP-CH1Z.
We suspect the same issue mentionned by zhouzhx, because we encounter the same behavior.
Could you please send us the source program or programming code of PIC18F4550?
Thanks for your help.
Regards,
Pierre