Kindly let us know whether the FMC connector of Xilinx Artix-7 FPGA AC701 eval board is pin compatible with AD9164 RF DAC eval board so that we can test various parameters of DAC with our custom code.
The differences are observed and are acceptable.
According to "https://wiki.analog.com/resources/eval/dpg/ad916x-fmcx-ebz" the mapping between the FMC lanes and the AD916x lanes on the AD916x-FMCx-EBZ evaluation board:
There is also some P/N inversion between Tx and Rx on the AD916x-FMCx-EBZ EVB to ease lay out:
Please take time and compare the pin configuration of Artix-7 with the above mentioned configuration.
The pins are compared. There are some differences. The voltage on the VADJ of FPGA is 2.5V whereas on the ADS7 eval board is 1.8V. The other differences are the green highlighted ones in the attached PDF. Kindly let us know whether those differences are OK for interfacing the two boards. PDF link: AC701 vs AD9164 connector Details