My customer is planning to use AD9736 14bit High-Speed DAC for his new design. They want to use AD9736-DPG2-EBZ applied with Xilinx SoC ZC706 evaluation board (FMC connector) for their design investigation.
The description in ftp://ftp.analog.com/pub/HSSP_SW/HSCDAC/Documents/AD9736/AD9736-DPG2-EBZ%20RevC%20Schematic.pdf "AD9736-DPG2-EBZ RevC Schematic.pdf" shows LVDS interface will connected to P11 and P12, the type of connector would be 1469028-1. Seems we need to apply AD-DAC-FMC board to connect with Xilinx board. But, in the https://www.analog.com/media/en/technical-documentation/data-sheets/AD9734_9735_9736.pdf Page 59 of 72 "High Speed Digital I/O Connector, AD973x Evaluation Board, Rev. F" document shows the type of LVDS connector is FCN–268 F024–G/0 D.
My questions is:
1. If we purchase AD9736-DPG2-EBZ EVB now, what kind of LVDS connector is on EVB? 1469028-1 or FCN–268 F024–G/0 D
2. Can FCN–268 F024–G/0 D connect to Xilinx board?
3. Shall we buy "AD-DAC-FMC" for the connection between AD9736-DPG2-EBZ & Xilinx board now?
Any assistance with this manner would be appreciative.
1- 1469028-1 connector is on the board (please refer to the BOM https://wiki.analog.com/resources/eval/dpg/eval-ad973x)
3- if you want to connect it to FPGA board you need to by AD-DAC-FMC-ADP board…