The PIC18F24J50-I/ML on AD9739A-FMC-EBZ(rev C) seems not working well.
I have connected a USB cable to the AD9739A-FMC-EBZ but the AD9739A_SPI.exe (downloaded from High-Speed DAC Software Suite) couldn't recognize the device.
Actually, the LED XCR1 isn't lighted on, and my PC doesn't read any USB device when connecting AD9739A-FMC-EBZ.
My FPGA development board is Xilinx KC705, and I connect AD9739A-FMC-EBZ on the FMC LPC side
At first, I found the two jumpers JP1&JP2 missing, which has been discussed in:
I've put jumpers on JP1&JP2, and finally I got 1.8V on TP12 and 3.3V on TP1.
The power supply should be no problem now, but I still find the LED XCR1 not lighted on
The jumper on J2 has been switched to USB_SPI, and the VDD to PIC18F24J50-I/ML is 3.3V right now
Is there any USB drivers I should install on my PC in order to use AD9739A-FMC-EBZ?
Or, did I miss anything to start with AD9739A-FMC-EBZ?
Thanks for your help