As simple question about AD9162, is it possible to implement I/Q modulation by AD9162-FMC-EBZ EVB connecting to an ADS7-V2 ?
It is possible and very straight forward. Please follow our User Guide which shows how to do that. Please let us know if you have further questions.
Thank you very much for our support. I refer to AD9162-FMC-EBZ Evaluation Board Quick Start Guide.
Is it possible without ADS7 board, too ?
The customer hopes that the outline of I/Q modulation by AD916x is below.
Carrier frequency (Fc) -> 270MHz, 1.485GHz, 2.97GHz, 5.94GHz and 11.88GHz
Modulation frequency (Fm) -> 1kHz, 10kHz and 100kHz. each 0%~100%, 1% step. 100% means one cycle of the carrier.
In this case, we have to select 2x NRZ mode because the carrier frequency include 5.94GHz. But I'm not sure how to select the mode on AD916x initial Worksheet.
When we would like to change the carrier frequency into 270MHz, we could only enter 270MHz to NCO frequency cell on AD916x Initial Worksheet ?
When we would like to set the modulation frequency to 1kHz, we could enter the desired frequency to 1kHz on DPGDownloader and check "Generate Complex Data(I & Q) ?