Post Go back to editing

External trigger capuring

Thread Summary

The user seeks to synchronize the capture with an external trigger on the HSC-ADC-EVALZ + AD9671EBZ development kit to ensure FFT bins correspond to the same part of the input sequence. The support engineer offered to provide the reference FPGA source codes but requires the user to accept a friendship request for verification. The user clarified that the question is related to starting a synchronous capture in response to an external trigger.
AI Generated Content
Category: Software
Product Number: HSC-ADC-EVALEZ (HADv6-FMC)

I have this HSC-ADC-EVALZ + AD9671EBZ development kit. I want to synchronise the capture with an external trigger, because I’m performing an FFT and I want the bins to correspond to the same part of the input sequence. 

I found some FPGA files on this forum that should support sampling with an external trigger. Something like the example with the AD9656 ADC. In VisualAnalog, I’m using this bitstream: “ad9671_evalez_09292014_1025am.mcs”.

That’s why I asked if you could send me either a bitstream with functionality similar to the AD9656 project, or the original project with the missing cores, so that I can synthesise the bitstream with that functionality myself. I assume that ‘ad9671_evalez06132014_0921am.mcs’ contained this functionality. Also, if possible, could you send me the ISE 14.7 project for the combination with the AD9656?

Thank you.

Thread Notes

Parents Reply Children
No Data

Before You Switch


Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.