Latest equvalate ADC

Hi marcinB ,

Please visit this link: Selection Table for High Speed A/D Converters >10 MSPS | Parametric Search | Analog Devices.

You can perform parametric search for high-speed ADC converters >10 MSPS. Please fill the categories base on your complete requirements. Also, the product also states if it is recommended for new designs.

The AD9204-20 would be worthy of consideration.

AD9204 Datasheet and Product Info | Analog Devices

H, 

Unfortunettly I need higher resolution (14 or 16 bit) and only these interfaces:

- LVDS or Parallel.

Application SWIR camera for grain sorting.

So far I consider:

AD9248BSTZ-20

AD9251

LTC2140CUP-14

AD9269-20

Could you please recommend me which will be the best?

Thank you!

Marcin

It will be a new design and this  ADC will be an interface between Hamamatsu SWIR Sensor  (G17225-512DE) and FPGA

PDF

H, 

Unfortunettly I need higher resolution (14 or 16 bit) and only these interfaces:

- LVDS or Parallel.

Application SWIR camera for grain sorting.

So far I consider:

AD9248BSTZ-20

AD9251

LTC2140CUP-14

AD9269-20

Could you please recommend me which will be the best?

Thank you!

Marcin

It will be a new design and this  ADC will be an interface between Hamamatsu SWIR Sensor  (G17225-512DE) and FPGA

PDF

Hello,

Perhaps the LTC2270 is worth considering since it has the highest dynamic range at 16-bits with very low noise and excellent static DNL/INL characteristics for imaging.

Hello,

For the driver solution that interfaces to high source resistance imaging sensor (i.e. 5 kohm).....perhaps device below is suitable albeit the setting time may be lacking for 15 MSPS operation which ideally would require settling to better than 0.001% under 66.7 nsec.

LT6350 - Low Noise Single-Ended to Differential Converter/ADC Driver (analog.com)