Hi,
In the AD9082+ZCU102 setup, we get on jesd_status -s - jesd disabled. attached is the results for both Tx.Rx.
In the dmesg - we get: [ 8.852547] jesd204: /axi/spi@ff040000/ad9081@0,jesd204:0,parent=spi1.0: JESD204[0:2] In link_running got error from cb: -1
Which indicates an error. Log is attached.
I'd like help in this issue.
Thanks.3348.ad9082_log.txt
(DEVICES) Found 2 JESD204 Link Layer peripherals
(0): axi-jesd204-rx/84a90000.axi-jesd204-rx [*]
(1): axi-jesd204-tx/84b90000.axi-jesd204-tx
(STATUS)
Link is disabled
Link Status
Measured Link Clock (MHz) 250.021
Reported Link Clock (MHz) 250.000
Measured Device Clock (MHz) off
Reported Device Clock (MHz) 250.000
Desired Device Clock (MHz) 250.000
Lane rate (MHz)
Lane rate / 40 (MHz)
LMFC rate (MHz)
SYSREF captured
SYSREF alignment error
SYNC~
(LANE STATUS)
Lane# 0 1 2 3 t
root@analog:~# 0 0 0 0
(DEVICES) Found 2 JESD204 Link Layer peripherals
(0): axi-jesd204-rx/84a90000.axi-jesd204-rx
(1): axi-jesd204-tx/84b90000.axi-jesd204-tx [*]
(STATUS)
Link is disabled
Link Status
Measured Link Clock (MHz) 250.023
Reported Link Clock (MHz) 250.000
Measured Device Clock (MHz) 250.023
Reported Device Clock (MHz) 250.000
Desired Device Clock (MHz) 250.000
Lane rate (MHz)
Lane rate / 40 (MHz)
LMFC rate (MHz)
SYSREF captured
SYSREF alignment error
SYNC~
t
root@analog:~#
