ADS7 used with customized AD9695 board.

Moving to High-Speed ADCs forum

Moved to High-Speed ADCs forum, as they support the ACE software.

Hi Jun,

Thanks for your interest in AD9695.

ACE will check the board EEPROM information, it does not support the customer's board. It is recommended to use ADI official EVB to run ACE.

Normally, we ask customer ship ADI EVB back to ADI if the board lost EEPROM information, we can re-program the EEPROM.

If you could ship your board to ADI, we will try to write the EEPROM for you.

Regards,

Alvin

Alvin,

We are building our own board to evaluate the performance of the whole system (software defined radio) including AD9695. Is it possible for you to program the EEPROM for our board? If not, is there any easy way to get the AD9695 output data? Thanks.

Jun

Hi, Alvin, 

I see this post:

Creating a Custom ADC Board for ADS7-V2EBZ - Q&A - High-Speed ADCs - EngineerZone (analog.com)

The tool in this link can be used to program the EEROM. The Command Prompt EEPROM Programmer requires 2 parameters to be passed into it. Can you provide the file containing the data to be programmed to the EEPROM? Really appreciate your help.

Thanks,

Jun

Hi Jun,

I'm currently out of office this week. Sorry for the delay.

Could you provide more details about your AD9696 system board design? 

I assumed that your board is the same design as ADI evaluation board. I can send you the .fmceeprom data to you, but I'm not sure if it works on your system board. 

Normally, customer don't use ACE and ADS7-V2 to control their own board.

Regards,

Alvin

Alvin,

The ADC part of my board is the same design as ADI AD9695 evaluation board. Once we finish the overall system evaluation, we will develop our own software and the FPGA part. Thank in advance for providing the .fmceeprom data.

Thanks,

Jun

Hi Jun,

Thanks for the updating. 

I just sent a private message to you. We may need some more information about your application for internal review.  Please feel free to respond. Thanks

Regards,

Alvin