AD6657 four-channel capture at the same time ?

Question

Hi, 
 I programmed as image. I apply a clock signal of 100 MHz. 
 (I also upload a VisualAnalog file.) 
 But It seems that the four-channel receiver (A,B,C,D) is not captured at the same time. 
 Is it still impossible as posted in 2014? 
 Or is there any solution for catpuring the four-channel receiver at the same time? 
 Thanks for your help. 
 Soosoo Oh 
 
 ad6657a_real4.zip

JAlipio · Accepted Answer

Hi Soonsoo, 
 Thanks for your interest in AD6657. 
 The Visual Analog software is capable of viewing the four channels at once. Unfortunately, t hese four channels are still not synchronous or captured at the same. This is due to the limitation of the capture board. 
 The samples below shows that the channel A and channel B are not synchronous even though they have the same input from a splitter. Simultaneous capturing of the four channels requires a custom firmware and software. 
 
 Regards, 
 Adrian)

Partner Forums

Partner Libraries

Products Mentioned

AD6657 four-channel capture at the same time ?