FPGA reference code for AD9213-10GEBZ-B and the ADS8-V1EBZ

Hi TonyC1,

Thank you for your interest in AD9213. My colleague will send you the FPGA reference code.

We'll update you once the code is sent to you.

Best regards,
Peevee

Hi TonyC1 ,

Let us know if you were able to receive the code.

Thank you.

Best regards,
Peevee

Got it thank you

After studying the code, it looks like you sent me the code for the AD9213-10GEBZ (the A model) not the B model AD9213-10GEBZ-B can you please send me the code for the AD9213-10GEBZ-B!

Thanks

Hi TonyC1,

I'll check on that.

FYI ADI is on summer break this week, so I won't be able to get information until sometime next week.

Thanks,

Doug

Hi TonyC1,

Sample FPGA code for AD9213-10GEBZ-B and ADS8-V1EBZ has been sent to you.

Doug

Hello,

           I am working with  HSC-ADC-EVALEZ +AD9681. Now my work is to program the FPGA on HSC-ADC-EVALEZ (Virtex 6). Whether is there any source code for this board? both VHDL and verilog is better.

           Thank you so much!

Hi JSA,

Thank you for your interest in AD9681. The FPGA on HSC-ADC-EVALEZ gets programmed by VisualAnalog software. You do not need to program the FPGA outside of VisualAnalog. Are you having problems programming the FPGA?

I'll still request the sample FPGA code be sent to you.

Doug

Hi DougI,

Thank you for your help.

I have some questions about FPGA programming. I'll read this code carefully.

Hi Dougl,

When I read the code you sent me, I had some questions.

How does HSC-ADC-EVALEZ communicate with PC via USB, and does the entire FPGA program only need to output the corresponding signal without controlling the USB? And what type of USB chip is the HSC-ADC-EVALEZ?

JSA

Hi Dougl,

When I read the code you sent me, I had some questions.

How does HSC-ADC-EVALEZ communicate with PC via USB, and does the entire FPGA program only need to output the corresponding signal without controlling the USB? And what type of USB chip is the HSC-ADC-EVALEZ?

JSA