Interfacing AD9680 with • Digilent Genesys 2 Kintex®︎-7 FPGA Development Board

Sorry, There is a typo. Please read it as "Is it possible to Interface AD9680-LF1000EBZ Evaluation board with Digilent Genesys-2 Kintex®-7 FPGA Development Board ?" 

Hi PRA360,

Thank you for your interest in AD9680.

You may refer to this wiki guide for the evaluation of AD9680 using ADS7-V2. 

EVALUATING THE AD9680/AD9690/AD9234 ANALOG-TO-DIGITAL CONVERTER [Analog Devices Wiki]

The reference hardware design files are available here for your reference.

We can provide the reference FPGA source code. Let us know if you want to get a copy, just make sure to provide a correct information on your profile.

Best regards,
Peevee

Hi PRA360,

Thank you for your interest in AD9680.

You may refer to this wiki guide for the evaluation of AD9680 using ADS7-V2. 

EVALUATING THE AD9680/AD9690/AD9234 ANALOG-TO-DIGITAL CONVERTER [Analog Devices Wiki]

The reference hardware design files are available here for your reference.

We can provide the reference FPGA source code. Let us know if you want to get a copy, just make sure to provide a correct information on your profile.

Best regards,
Peevee

Hi Peevee,

Thanks for the reply. I had gone through the suggested guide where the details of evaluation of AD9680 using ADS7-V2 are mentioned. However, for interfacing several other peripherals along with AD9680, we have to use  Digilent's Genesys 2 Kintex®-7 FPGA Development Board for the desired DSP. In this context, wanted to make sure whether the above interfacing is okay or not. I mean, would there be any hardware or software/firmware compatibility issue ? I would be grateful to you if you share some information on it.