Post Go back to editing

jesd204b configuration for AD9083

Category: Software
Product Number: AD9083
Software Version: Vivado2019.2

Hi,ADI

If my jesd204b has L=1,then the ad9083 will transmit through that line?

And how do I confirm that the JESD204B configuration is complete after the jesd204b configuration is done?
I hope someone will have some free time to reply to me.

Best regards,
Rookie

Parents
  •  Hi ,

    In addition to below, in order to check that the link has been established....  For that, you need to check status bits in the FPGA.  You should have bits akin to “CGS complete”, “Frame Sync established”, “ILA complete”, and “Data_ready”.  you can check the documentation for the IP you are using for the names of these status bits.

    regards Brigid.

Reply
  •  Hi ,

    In addition to below, in order to check that the link has been established....  For that, you need to check status bits in the FPGA.  You should have bits akin to “CGS complete”, “Frame Sync established”, “ILA complete”, and “Data_ready”.  you can check the documentation for the IP you are using for the names of these status bits.

    regards Brigid.

Children
No Data