AD9253 Multi Chip Synchronization

Hi Deva1998,

Thanks for your interest in AD9253.

Deva1998 said:

1)Is it possible to achieve our Phase matching Requirement with the selected part AD9253-105?

Yes, you can use the SYNC signal of AD9253 to achieve multichip synchronization and phase matching requirement.

Deva1998 said:

2) What would be Part to part Latency variation? will this latency be deterministic or will it vary from Power on to Power ON based on Temperature and Voltages?

Yes, it may vary from power on to power on and we recommend synchronizing after power cycle.

Deva1998 said:

3)Please share the Test Results demonstrating Phase matching Accuracy using AD9253-105.

I am not sure if we have this kind of data but, I'll ask if we have data for the phase matching accuracy.

You can also refer to AD9643 CHANNEL/CHIP SYNCHRONIZATION section for reference since the AD9643 has the same SYNC function with AD9253.

Thank you.

Regards,

Xavier

Hi Deva1998,

Thanks for your interest in AD9253.

Deva1998 said:

1)Is it possible to achieve our Phase matching Requirement with the selected part AD9253-105?

Yes, you can use the SYNC signal of AD9253 to achieve multichip synchronization and phase matching requirement.

Deva1998 said:

2) What would be Part to part Latency variation? will this latency be deterministic or will it vary from Power on to Power ON based on Temperature and Voltages?

Yes, it may vary from power on to power on and we recommend synchronizing after power cycle.

Deva1998 said:

3)Please share the Test Results demonstrating Phase matching Accuracy using AD9253-105.

I am not sure if we have this kind of data but, I'll ask if we have data for the phase matching accuracy.

You can also refer to AD9643 CHANNEL/CHIP SYNCHRONIZATION section for reference since the AD9643 has the same SYNC function with AD9253.

Thank you.

Regards,

Xavier

Hi Xavier,

Thanks for your reply,

Please share the Test Results demonstrating Phase matching Accuracy in ps using AD9253-105 so that we can proceed with confidence for out requirement of less than 30ps.

Thanks in-advance,

Deva

Hi Deva1998,

We can talk this offline if you want to proceed with this and also to clarify the purpose of this phase matching accuracy parameter.

Thank you and regards,

Xavier