Category: Software
Product Number: AD9634
Software Version: NA
When I set AD9634 work bellow 20MSPS, it doesn't work, no output from DCO pin.
I use AD9517 generate 12.5MHz clock to AD9634, AD9634's internal divider is 1(reg 0xB is 0), but no output from DCO pin.
If I modify AD9517 to raise the clock up to 20MHz, DCO pin output is ok;
I wonder that AD9634 can work bellow 20MSPS? How to realize it?
thansk
AD9634使用时，当采样率为20MSPS以下时，不能正常工作，DCO管脚无任何输出；
AD9634输入时钟为12.5MHz，时钟源来自AD9517，AD9634内部divider为不分频模式（0xB寄存器配置为0），但发现DCO管脚无任何输出
如果输入时钟提升到20MHz就正常了
我想实现12.5MSPS的采样率，确认一下AD9634能支持20MSPS以下的采样率么？我的实现方案是否有问题？应该怎么配置？
