AD9213 FPGA Reference Design

Hi MGarrett,

Thanks for your interest in AD9213. There is no FPGA reference design for AD9213, but we can share the FPGA source code we use for capturing AD9213 outputs, as an example.

I'll request that to be sent to you.

Thanks,

Doug

Hi,

Would it be possible for me to get the FPGA source code for the AD9213 as well? We recently bought an AD9213 to be used with a VCU118. 

Thanks a lot,

Asger

Hi Asger,

Thanks for your interest in the AD9213. I've requested that sample FPGA code for capturing AD9213 outputs be sent to you.

Please keep in mind that this is sample code written specifically for the ADS8-V1EBZ ( ADS8-V1EBZ Evaluation Board | Analog Devices ).

Thank you.

Doug

Hi Dougl,

COuld you please share the sample FPGA code for AD9213 with me?I am trying to use it with VCU118

Thanks in advance 

B MOURYA 

Hello,

We've tried a while back to create an reference design for ad9213 evaluation board, but at the time the evaluation board didn't provide any reference clock to the FMC connector, making it impossible to work with the VCU118. Not sure if a new revision of the evaluation board is available, but at that time this was a show stopper for us.

Regards,

Adrian

Hi AdrianC,

                          Thanks for the reply ,we are not using the ad9213 evalution card. we bought one card from hitech global which consists of ad9213 and AD9172 .we are trying to build the driver for this .So if you provide any reference fpga source code for AD9213 then that would be a great start for us .Already I am trying to port AD9152 driver for AD9172 with VCU118.

Thanks in Advance 

Hello,

We don't have specific code for AD9213. We have this close design for VCU118: https://wiki.analog.com/resources/eval/user-guides/ad9208_dual_ebz/ad9208_dual_ebz_hdl.

We also have a specific design for a DUAL AD9213 board which targets Intel's Stratix 10 SOC (https://github.com/analogdevicesinc/hdl/tree/master/projects/ad9213_dual_ebz) but the documentation and software is still under development.

Another reference design for AD9172 can be found at https://wiki.analog.com/resources/eval/user-guides/ad-dac-fmc-ebz, but this also is supported for different carriers than the VCU118.

Regards,

Adrian

Hi Dougl,

our university team is starting to develop a project with ad9213. Would it possible to share FPGA source code with me?

Thank you very much,

T. Kulhanek

Hi Dougl,

Can I get a copy of this code as well, I am using the AD9213 with the ADS8-V1EBZ.

Thanks

Hi Dougl,

Can I get a copy of this code as well, I am using the AD9213 with the ADS8-V1EBZ.

Thanks

Hi TonyC1,

I've requested that sample FPGA code for AD9213 and ADS8-V1EBZ be sent to you. You should receive it within a day or so.

Thank you.

Doug