AD9683 dev board (with FMC connector) design files

Hi Meriam,

many thanks for your reply. Would you be able to share the dev-board layout with me?

Many thanks,

Krzysztof

Hi Meriam,

Do you know if this board (for AD9683-250) available to buy anywhere? 

Best Regards,

Ömer.

Hi Omer,

In the eval page of AD9683 EVAL-AD9683 Evaluation Board | Analog Devices, you may check the inventory in 'Buy' section for the availability of boards and option of vendor (i.e Mouser, Digi-key).

Regards

Meriam

Hello Meriam, thank you very much for the reply. 

When I do what you have said, I see that those boards available from vendors (Mouser and Digikey) shown as boards with Tyco connectors and not FMC connectors. 

And there is one more problem added to this: The interposer board, which is for matching between Tyco connectors and FMC connector,  is also not available anywhere.

I am having a hard time to overcome this combined issue to be able to evaluate AD9683-250 ADC. 

Best Regards,

Ömer.

Hi Meriam,

Many thanks for sending that. Would you be also able to share with me the layout in *.BRD format?

Best regards,

Krzysztof

Hi Krzysztof,

Please see attached .brd file.

Regards,

Meriam

AD9683_Eval_Brd.zip

Hi Omer, 

We believe that the board available for purchase on this part at this time should only be FMC version. The HSC-ADC-EVALDZ controller compatible for tyco boards has been obsoleted hence board has been migrated to the one with FMC connector. I think the product image in the webpage was not just updated yet. 

Can you confirm if your recent purchase was with the tyco connector and not the FMC version?

Regards,

Meriam

Hello Meriam, 

Thank you for the comment. I did not purchase the board yet since I was not sure if there is a solution to the evaluation. I now have asked to one of the vendors about the board they have in their stock. 

Also I see that there is availability in the Analog Devices own stocks when I look at the product page:

  https://www.analog.com/en/products/ad9683.html#product-samplebuy

Hi Meriam,

many thanks for sharing that with me. Would you be also able to share with me the layout of the https://wiki.analog.com/resources/eval/ad9250-ad6673ebz EVAL-AD9250 as this is another ADC I am considering for my project.

Many thanks in advance!

Best regards,

Krzysztof

Hi Omer,

You can purchase directly to Analog.com site but only limited up to two boards. But please note that prices may vary.

As previously mentioned, you should only be able to purchase FMC version at this time.

Regards,

Meriam

Hi Krzysztof,

Thanks for your interest in AD9250 as well. Please see attached .brd file of the eval board.

Regards,

Meriam

AD9250_Eval_Brd.zip