Hello
I am having problems with an analyze of the AD9567 NATIVE FMC BOARD.
The AD9467 have 16bit output and can run up to 250MSPs
The output is differential, but i does only have 8 outputs. (8+ and 8 - differential)
so
D1−/D0−
D1+/D0+
How do you read the data from D0 and D1 when they share the same differential pins ?
Sorry if it is a stupid question.
Hi Max,
the AD9467 has 16 differential outputs. Please see datasheet pages 9 and 10.
http://www.analog.com/static/imported-files/data_sheets/AD9467.pdf
The timing diagram (DDR LVDS) is shown in figure…
Hi,
The AD9467 uses DDR (double data rate) mode, so on each clock cycle there will be data for 2 output bits on each differential pair. Please see figure 2 on page 7 of the data sheet for a timing diagram…
