Post Go back to editing

HSC-ADC-EVALCZ + AD9629-80EBZ + external trigger

Hello,

we recently purchased a combination of the HSC-ADC-EVALCZ and AD9629-80EBZ evaluation boards.

We would like to start the FIFO acquisition process by external trigger initiation.

Is there any way to make this setup work?

Best regards

Michael

Parents
  • Hi Michael,


    I've put together some instructions on using the externally triggered capture feature on the AD9629 evaluation board and HSC-ADC-EVALCZ.

    Basically, to perform triggered capture, a new FPGA program needs to be loaded and the trigger signal is applied to SMA1 on HSC-ADC-EVALCZ after the voltage on SMA2 = 2.5V (ready signal).

    The details are contained in the QuickStart Guide. The following link contains the QuickStart guide and the FPGA program file.

    https://wiki.analog.com/_media/resources/eval/ad9649_9629_9609_triggered_capture_files.zip

    Contents:

    AD9649_29_09_TriggeredCapture_QuickStartGuide_PrA.pdf (Instructions)

    ad9649_fifo5.bin (FPGA program file)

    Please let me know if you have any questions. Thank you for using the AD9629.

    Doug

  • Hi Doug,

    We're using AD8283 board for our development test and I want to see if we can get the FPGA program file for using the external trigger data. I've seen FPGA files for other ADC boards but I could not find it for AD8283 board.

    is there any way to get that FPGA bin file?

    Thanks,

    Orod  

Reply
  • Hi Doug,

    We're using AD8283 board for our development test and I want to see if we can get the FPGA program file for using the external trigger data. I've seen FPGA files for other ADC boards but I could not find it for AD8283 board.

    is there any way to get that FPGA bin file?

    Thanks,

    Orod  

Children