Do you have a good idea for connection AD9287-100EBZ?

Dear Sir/Madam,

Our customer will use your AD9287-100EBZ and ML695(Xilinx).

But they cannot connect due to that there is put the difference type connectors.

So we need the transfer board in there I think.

eg-1;

AD-DAC-FMC-ADC

We cannot use this due to that the each side connectors are male connectors.

eg-2;

CVT-FMC-ADC-INTPZT

FPGA cannot take the data signals ADC/4ch,clock/2ch on the own bank.

Do you know the good connector like a eg;Z-Pack HM-Zd?

Thanks Kaos

Parents
  • Hi Kaos,

    Thank you for working with the AD9287 customer.

    You already mentioned the CVT-ADC-FMC-INTPZB. This is what came to mind when I saw your question. I believe that CVT-ADC-FMC-INTPZB takes the AD9287 outputs to the appropriate FMC connector pins.

    One of the considerations is to make sure that DCO connects to one of the clock-compatible FMC pins. This condition is satisfied.

    You indicate that there is an issue with the FPGA taking the data and clock signals on the "own bank". Could you please explain more about this?

    Thank you.

    Doug

Reply
  • Hi Kaos,

    Thank you for working with the AD9287 customer.

    You already mentioned the CVT-ADC-FMC-INTPZB. This is what came to mind when I saw your question. I believe that CVT-ADC-FMC-INTPZB takes the AD9287 outputs to the appropriate FMC connector pins.

    One of the considerations is to make sure that DCO connects to one of the clock-compatible FMC pins. This condition is satisfied.

    You indicate that there is an issue with the FPGA taking the data and clock signals on the "own bank". Could you please explain more about this?

    Thank you.

    Doug

Children
No Data