I'm looking for the schematic of following AD9671-EBZ.
I want to check the evaluation board.
Thank you for your interest in AD9671. Do you have the exact board in your picture? The reason I ask is that the released evaluation board for the AD9671 is a little different from the one in your picture. The released AD9671 evaluation board has an FMC connector and does not need the interposer.
For which board do you want the schematic? There is little support available for the older board that is in your picture.
Thank you for your reply.
I'm using the evaluation board in this photograph.
I'm using the following FPGA Reference design.
AD9671 Evaluation Board, ADC-FMC Interposer & Xilinx KC705 Reference Design [Analog Devices Wiki]
When the AD9671 is operated by the test mode, the receive data of FPGA is different.
The schematic is necessary so that I may debug this problem.
As for the AD9671 evaluation board with the FMC connector, does the FPGA reference design operate?
The schematic file for the board you refer to is attached, however this board is the older eval board and the new board with the FMC connector is the officially supported board.
I am attaching the schematics and FPGA reference design for the FMC board as well for your reference.
I am interested in ordering this new AD9671 evaluation board. I don't see any online link for purchasing it. Do I also need to buy FMC interposer? I have Xilinx FPGA with FMC connector and will use it for this evaluation.