I am using an FPGA evaluation Board HSC-ADC-EVALCZ (Xilinx Virtex 4) for capturing the data from ADC Board AD9269 . After giving proper power supply to both FPGA and ADC board, i am not getting any spectrum(noise floor of ADC) in Visual Analog although my PC is detecting the FPGA Board. Capture LED in FPGA evaluation board is also not turning ON after giving proper power supply. Is it because of capture LED on FPGA Board that i am not able to see spectrum in Visual Analog.
I have attached image of my boards after connecting power supply.
Please help me to resolve this issue
Thank you for your interest in AD9269 and for providing the picture. The FPGA "Done" LED is not lit. This means that the FPGA is not programmed.
The User Guide for the AD9269 evaluation board is UG-003 https://www.analog.com/media/en/technical-documentation/user-guides/UG-003.pdf . Step 2 on page 8 shows a prompt to program the FPGA. Did you see this prompt? If so please be sure to click on "Yes".
Please let me know if this gets you past the issue.
Now its working.
You are very welcome. I hope your project goes well.