AD9601 connected to a processor to handle high speed

Hi all,

I am working with high speed ADC (200/250MSPS) to sample the signals and connect it to stm32f429 microcontroller.

How is it possible to handle such high speed ADC's as it cannot be directly connected to stm32? Can I use DSP or FPGA in between? How should it be done?

Thanks in Advance.

Top Replies

Parents Reply
  • 0
    •  Analog Employees 
    on May 15, 2019 5:33 PM over 1 year ago in reply to David.Buchanan

    The AD9601 shares an evaluation board with the AD9626 and the AD9434.  It interfaces to an FPGA on the HSC-ADC-EVALCZ used for data capture in the evaluation system.  You can find the pinout of the AD9601 to the interface connectors between the boards (P501, P502) on page 25 of the AD9601 data sheet. The mating connectors are in the schematic of the HSC-ADC-EVALCZ found on page 13 of this user guide: