I need to collect a large number of samples for the evaluation purpose. For that reason, I need to collect and retrieve the captured data automatically. I am wondering how I can retrieve the captured date through external software (i.e. c or Matlab code) either through the FPGA USB port or SPI (other than manual data collection via Visual Analog). Please kindly advise.
I am wondering if there is any C or Matlab example rather than Python/Labview. Please let me know.
I hope this thread helps.
this is all we have.
When I run the matlab script, I run into the following error message:
Error in wavegen = visa('ni','USB0::0xF4ED::0xEE3A::446J15109::INSTR');
Since ACE is connected and retrieved the data already, and we may not need to reconnect to the FPGA through visa, I commented the visa command.
Prior to running the code, I updated the client.ContextPath,
client.ContextPath = '\System\Subsystem_1\AD9694 Eval Board\AD9694';
Next, I run the code, but the following error message was triggered:
Error at the client.ContextPath = '\System\Subsystem_1\AD9694 Eval Board\AD9694' line
Message: Read from server timed out.Source: AnalogDevices.Csa.Remoting.ClientsHelpLink:
Could you please let me know how to work around the above error messages?
PS: I appreciate if you can let me know how to change the font color within the EZ post editor?
I am sorry I cannot help you more here. I have very limited knowledge of matlab and the controls. The documentation i sent you had worked in my lab. that is why i posted it on e-z.
The provided code is meant for AD7616 Eval board:
UmeshJ said:client.ContextPath = '\System\Subsystem_1\AD7616 Eval Board\AD7616';
Could you please confirm if you have tested the code on AD9694 Eval board, as well?
Please also let me know how to change the font color in your messages (within the EZ post editor).