For our design we are using AD9680 eval board integrated with VCU118 board via FMC.
While configuring the same with SPI, most of the times SPI read is zero. And we are observing when we assert read signal during instruction state , sdio line input to FPGA
has some spikes for that period.
Ideally we should have the data out from ADC to FPGA by next clock cycle.
We have checked the same via your data acquisition card received with ADC eval board. But same thing when we are running our SPI engine it is failing.
More over from FPGA it is 4 wire and we have seen there is data buffer on ADC eval board which make 2 single ended IOs as bidirectional port to ADC chip.
Please let us know if we need to take care of thing which we are missing. Do we have any HDL code available to configure the same.
emailed the file.
Received files via email.
I am seeing so many files. Can we get readme file or any user guide if you have any please .
open the "AD9680_ADS7v2.xpr" file in vivado. it is in the vivado folder
I am seeing the top level file has inputs of spi clk, chip select. As per ADC requirement we should be driving the same. Looks like it is saying blackfin will update. is my understanding or analysis is wrong.
not sure. I am not an fpga expert. i can ask and let you know, but we do not provide any active support for our HDL. it is given on an "as-is" basis.