AD9269 interfacing with Virtex5

Hi,

I have bought an AD9269-80EBZ evaluation board for real time data capture application. I have a Xilinx Virtex 5 board and I want to interface AD9260 board with Virtex 5 for data acquisition. Can someone please provide me an example SPI programming code and a data capture code for Virtex 5.

Also, I am having hard time finding the interface connector for AD9269 and Vitex5. Ad9269 eval board comes with outputs on z-pack connector(male) and Virtex5 connects with berg stick connectors (male). Can you please point me to a connector that can be used to interface the two.

Thanks a lot in advance.

Thanks&Regards,

Ananth

Top Replies

Parents
  • 0
    •  Analog Employees 
    on Jan 23, 2019 12:21 AM

    Hi Ananth,

    Thank you for your interest in AD9269.

    The FPGA we use to capture AD9269 outputs is the Xilinx Virtex4 (on HSC-ADC-EVALCZ). Sample FPGA code for AD9269 data capture can be found here . This is provided:

    • Freely
    • As-is
    • With no guarantee

    SPI communication follows the guidelines in AN-877, which is found on our website ( https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf ).

    I'm sorry but I do not know of any adaptor/interposer that will connect the AD9269 evaluation board to a Berg stick connector. I think you will have to make your own, maybe with a ribbon cable, or something similar.

    The AD9269 connector pin assignments can be found in the AD9269 evaluation board user guide, UG-003 .

    I hope your project goes well.

    Doug

Reply
  • 0
    •  Analog Employees 
    on Jan 23, 2019 12:21 AM

    Hi Ananth,

    Thank you for your interest in AD9269.

    The FPGA we use to capture AD9269 outputs is the Xilinx Virtex4 (on HSC-ADC-EVALCZ). Sample FPGA code for AD9269 data capture can be found here . This is provided:

    • Freely
    • As-is
    • With no guarantee

    SPI communication follows the guidelines in AN-877, which is found on our website ( https://www.analog.com/media/en/technical-documentation/application-notes/AN-877.pdf ).

    I'm sorry but I do not know of any adaptor/interposer that will connect the AD9269 evaluation board to a Berg stick connector. I think you will have to make your own, maybe with a ribbon cable, or something similar.

    The AD9269 connector pin assignments can be found in the AD9269 evaluation board user guide, UG-003 .

    I hope your project goes well.

    Doug

Children