Dear Sir/Madam,
We are going to use AD9257 for Image sensor and studying VisualAnalog
using AD9257-65EBZ and HSC-ADC-EVALCZ.
AD9257 is connected with 8-ch CMOS sensor.
So,we want to acquire Row_data of AD9257.
What is the simple or best method using VisualAnlog?.
Attached image is sample canvas.
It would be greatly appreciated if advice could be gotten.
Sincerely yours,
Kou
Hi Kou-san,
Thank you for the information.
Here is one thing to try. If you push the Settings button on the Input Formatter block in the VisualAnalog canvas, you will get a settings window.
Please try checking the Enable Weighting check box to see what voltage is associated with the code range you are seeing.
Also, when you look at your test tone in the FFT canvas, what amplitude are you seeing in the FFT?
The AD9257 is in its power-up default state, correct?
Thank you.
Doug
Hi Kou-san,
Thank you for the information.
Here is one thing to try. If you push the Settings button on the Input Formatter block in the VisualAnalog canvas, you will get a settings window.
Please try checking the Enable Weighting check box to see what voltage is associated with the code range you are seeing.
Also, when you look at your test tone in the FFT canvas, what amplitude are you seeing in the FFT?
The AD9257 is in its power-up default state, correct?
Thank you.
Doug
