Post Go back to editing

CN0532 long term operating temperature

Category: Hardware
Product Number: CN0532

Hi, 

One of the equipment for which we want to monitor vibration has a surface temperature of 90 to 110 degree Celsius. These conditions are during 10 hour shifts, 6 days a week.
Is the CN0532 capable for the job? The datasheet says maximum operating temperature 125 degrees, but it doesn't say anything about long term reliability at high temperatures.

Regards,

Parents
  • Hi, 

    All CN0532 components are rated to 125C, but we did not characterize long term reliability of this circuit. Notice that the ADXL1002 (accelerometer on the CN0532) is on a over molded package, so package degradation/aging is expected at high temperatures. This would be translated as an offset drift at the output of the ADXL1002. Generally, we would expect the ADXL1002 to drift a few 100 mg over life time, but this is very difficult to quantify as is application dependent. 

    I hope this helps, 

    Pablo .

Reply
  • Hi, 

    All CN0532 components are rated to 125C, but we did not characterize long term reliability of this circuit. Notice that the ADXL1002 (accelerometer on the CN0532) is on a over molded package, so package degradation/aging is expected at high temperatures. This would be translated as an offset drift at the output of the ADXL1002. Generally, we would expect the ADXL1002 to drift a few 100 mg over life time, but this is very difficult to quantify as is application dependent. 

    I hope this helps, 

    Pablo .

Children