Category: Hardware
Product Number: max96712, max967
I'm using max96712 and max96717. When the camera is connected to ports 0 and 1 of the max96712, the synchronization signal can be normally mapped to the pins of the max96717 through the pins of the max96712. However, when the camera is connected to port 2 and 3, after configuration mapping, the pins of the max96717 remain at a high position. The register configuration is as follows:
96712:
0 x32c 0x83
0 x364 0x27
96717:
0 x2d5 0x87
0 x2d3 0x4
At this point, when reading the 0x2d3 register of 96717, the value is always 0xc.
