AD9508 in CMOS Single-Ended Output Configuration

Question

Accepted Answer

Question Related to the AD9508 I would like to know which is the minimum and the maximum 
 voltage of the output clock signals when they are used as CMOS single-ended. I 
 would need a clock signal ranging from 0V to 3.3V, can this signal distributed 
 in the AD9508 getting the same range of voltage in the outputs? Answer The CMOS output levels are typically 0 to 1.8V for no load. The data sheet has 
 the specifications on how that amplitude changes with different load currents 
 as given below-

The AD9508 does not support 0 to 3.3V CMOS drivers, only 1.8V.
 
 For more information, you may also look at the characterization graphs in 
 datasheet.

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Upcoming Learning & Events

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

Products Mentioned

Associated Drivers

AD9508: FAQ