ACE 32/64 bit not showing HMC7044 GUI diagram in AD9213-10GEBZ-B

Hi Atron 

Thank you for bringing this to our attention, 

It seems that the HMC7044 is indeed blank and the chip was added to expose the memory map functionality, which you have found, but the blank device view was a side effect of this.

This is of course not ideal and somewhat misleading, we will work on an update on our side to add a view here to avoid future issues, but for now there is no functionality for the device view on the HMC7044.

You should still be able to modify the configuration of the device by using the memory map to edit registers and bitfields, however this will require manual determination of which fields to edit using the data sheet, there is no GUI defined for simple editing of the config as with the AD9213 and AD4371.

Apologies for any inconvenience caused by this.

If there are any specific configurations or device parameters you would like to be able to apply via a GUI interface for the HMC7044, your feedback would be appreciated and we will pass it along to the product team as a recommendation for the device view.

Thanks
Eoin

Thanks very much, i will appreciate the update of GUI functionality of this part.

if i need specific configuration. which can be applied via import csv file, can u provide such csv file?

HI Atron ,

I'm not able to provide a csv file, but I will move this thread to the Clock and Timing forum where they may be able to provide more support on this.

Thanks

Eoin

Hi Atron, 

The HMC7044 in the AD9213 ACE Plugin developed by the AD9213 team. They are only used the register map to set the part. 

We are developing a new ACE Plugin for HMC7044. If you are interested, you can use this development ACE plugin, generate .csv file after that import it to HMC7044 register map in the AD9213 ACE plugin. Please note that this is a development plugin, there might be some bugs. 

If interested, you can download it from myAnalog | Analog Devices

Thanks,

Emrecan.