Hi, the output voltage differential spec in Table 1 is as below:
what's the testing frequency for this spec?
And for Figure 18, what's the test temperature?
ADCLK925
Recommended for New Designs
The ADCLK905 (one input, one output), ADCLK907 (dual one
input, one output), and ADCLK925 (one input, two outputs) are
ultrafast clock/data buffers fabricated...
Datasheet
ADCLK925 on Analog.com
Hi, the output voltage differential spec in Table 1 is as below:
what's the testing frequency for this spec?
And for Figure 18, what's the test temperature?
Hi howardaaa ,
I could not confirm what was the frequency that was used when making the data sheet, but I could confirm that the frequency used for testing evaluation boards is 622.08 MHz.
As for the temperature, I also could not confirm the accurate value.
All the best,
Jules