The AD9546 has 13 pins labeled VDD, but does not go into further detail on them. I had connected them all together, but during a schematic review my colleague pointed out that it was likely desirable to isolate them. The EVAL-AD9546 schematic shows 5 of these 13 VDD pins isolated with ferrite beads. I was about to replicate this on my schematic, but i noted that the bead was situated between the decoupling capacitor and the VDD pin. This was surprising to me, so I figured I would ask here to make sure that is intended, and that the EVAL-AD9546 shows the best practice for providing power supply bypassing to this part.