Hi
Is the AD9575 input - exclusively setup for a crystal only or can it be driven with an LVCMOS signal?
If it can then I assume it would be driven into XO1, XO2 left open/Grounded?
Thank you.
KCC's Quizzes AQQ305 about a mutual exponentiation equation
1. Quote of the month: "A train station is where a train stops. A bus station is where a bus stops. I have a work station on my desk, so..." - unknown
2. Quiz AQQ305 about finding a mutual exponential equation
Good luck, and try to be among the
View All
September Monthly Blog Quiz! Read the blog, take the quiz, and you could win a gift card
Quiz: How Well Do You Know Adaptive Power Switching?
Is your I/O module overheating? The AD74416H's Adaptive Power Switching (APS) can cut heat dissipation by up to 40% — but how well do you really understand how it works?
Read the blog first: Cooling
View All
AD9575
Recommended for New Designs
The AD9575 provides a highly integrated, dual output clock
generator function including an on-chip PLL core that is
optimized for network clocking. The...
Datasheet
AD9575 on Analog.com
Hi
Is the AD9575 input - exclusively setup for a crystal only or can it be driven with an LVCMOS signal?
If it can then I assume it would be driven into XO1, XO2 left open/Grounded?
Thank you.
Hi,
the AD9575 can only have a crystal resonator connected at the XO1, XO2 pins. It cannot receive a CMOS clock at one of these pins.
Please take a look at the AD9552 or the AD9553 for chips that can receive a reference clock and create two output clocks.
Petre