Does anyone have the mechanical drawing for AD9516-0BCPZ? I want to make a housing for it.
the AD9516-0 evaluation board page has the Gerber files of the board. These files contains the information you are searching
I believe the error appears in you setting OUT8 in CMOS mode. The max frequency the AD9516-0 can generate in CMOS mode is 250MHz. See page 6 in rev C data sheet.
I took an AD9516-3 evaluation board (because I do not have one with the -0 variant) and I set it like you).
I set it to generate 1120MHz because the PLL VCO can go only up to 2.25GHz. I obtained immediately PLL to lock and generate OUT8=1120MHz in LVDS mode. When I set it in CMOS mode, the output went to 0V.
Please calibrate the VCO, otherwise the PLL will not function properly.