I am trying to get the Windows device drivers for the AD9520/22 Evaluation Board. I installed the AD9522EvalSetup.exe but it did not include the drivers.
I need drivers for Win XP and Win 7 64.
I apologize for the inconvenience. The AD9520/22 software is 32-bit only at this point, although you can use a 32-bit Windows XP virtual machine under 64-bit Windows 7 to use the USB driver. I've done this on my PC and it works fine.
The issue with 64-bit support started with the 64-bit driver for Cypress USB chip that we use. They elected to only support software developed using Microsoft .NET framework. We have been developing with .NET for awhile now, and we have 64-bit support starting with the AD9557 and newer parts.
It remains to be seen how much work is involved in going back and updating the AD9520 software (which uses an older DLL approach).
I'm trying to connect AD9520/PSBZ (rev B), AD9520-3 to 64-bit window 7. I'm not sure if AD9520-3 and AD9520/22 are using the same software. Is there any new solution to this problem rather than install 32-bit window XP on virtual machine?
The AD9520/22 evaluation software and USB drivers have been updated to be 64-bit compatible. However, you will need to download new software, and update the USB controller flash memory that contains the identity of the eval board. The program and instructions are in a readme file in the link below
All of which can be downloaded here:
You need the first three links on the above page under "Software and Tools."