I have done the programing of AD9520 clock synthesizer but I am not able to find out the way of programming the EEPROM. Kindly give me some suggestions.
Programming the AD9520 is actually quite simple:
1. Program the part into its desired state.
2. Write R0x0B02=0x01
3. Write R0x0B03=0x01
4. Poll register R0x0B00 and wait for it to read 0x00.
5. Verify that R0x0B01=0x00
To load the values from the EEPROM, ensure that the EEPROM pin is high during hard reset or power-up