Hi Analog Devices Community,
I am currently trying to put my eval-adicup360 board to a sleep mode (to reduce current consumption) and then wake it up after 24 hours of interval. My question is, which sleep mode should I use for it and how can I use timer interrupt to wake up the board from sleep mode?
I have found an example to put the board to power down mode; however, I am unable to find an example / code that will wake up the board from timer interrupt. Any help will be appreciated.
Thanks & Regards,
You can find the ADuCM360 example code with the website below
Please download the ADucMxxxV1.3.exe and install it. Then you will find the example codes. Be sure that the part ADuCM360 can enter the sleep mode, not the Eval board enter the sleep mode.
The table 55 in the ADuCM360 hardware user guide UG367 describes the interrupt vector that can wake up processor from different mode. So you can wake up the processor through external interrupt or Wake-up time. Just need to configure the corresponding registers.