RE: EVAL-CN0429-EBZ not displaying correct values.

If we would like to modify the ADuCM355 code in order customize what are the software tools that you recommend? What do you use for the programmer or debugger? J-Link? for the IAR C-SPY?

Parents
  • +1
    •  Analog Employees 
    on Jan 10, 2019 6:21 PM

    The software examples which will be released are developed in IAR Embedded Workbench. I recommend using this tool. In terms of the programmer/debugger, we tested the system with J-Link and also CMSIS-DAP (from mbed). In fact, there is a CMSIS-DAP debugger included on the ADICUP3029 board and it can be used to program the ADuCM355 daughter boards. You can find information about how to do this HERE

Reply
  • +1
    •  Analog Employees 
    on Jan 10, 2019 6:21 PM

    The software examples which will be released are developed in IAR Embedded Workbench. I recommend using this tool. In terms of the programmer/debugger, we tested the system with J-Link and also CMSIS-DAP (from mbed). In fact, there is a CMSIS-DAP debugger included on the ADICUP3029 board and it can be used to program the ADuCM355 daughter boards. You can find information about how to do this HERE

Children