If you have questions about CN0301, please post them below.
I have two questions about CN0301_Evaluation_Software.
When I choose the units of Inches or Millimeters, the change in value on channel 2 is the same. Why? The units we choose are different, but the change in value is the same. For example, they all go from 0.0156 to 0.0176.
When I change the maximum stroke range of the LVDT, the values on channel 2 are quite different. For example, when I set 0.20 inches, the value on channel 2 go from 0.0030 to 0.0036. When I set 1.00 inches, the value on channel 2 go from 0.0156 to 0.0176. What the relationship?When you do an experiment, how do you set the maximum stroke range of the LVDT?
We provide the source code for the CN0301 LabVIEW GUI up on our FTP site (ftp://ftp.analog.com/pub/cftl/CN0301/1.0.1/CN0301-Evaluation%20Source%20Code.zip ). We provide that so customers if they want can go in and tweak/modify things they may need to. I do need to tell you that we don't support customized code, so if you do change anything you do so at your own risk. We provide it as a service and jump start point.
I have asked one of our apps engineers to see if he can help answer your questions on the current supported software.