For questions or comments on CN0269, please reply below
I've looked through the CN0269 schematics for the pinout for J6 (a 2x6 0.1 header). This appears in the gerbers (from .zip archive) but not in either the .pdf schematic or the PADS .sch logic. From the gerbers, it appears that this header (J6) might be connected to the DOT SPI lines. Any help would be appreciated.
Thanks a lot for your help to points out this issue. I would update the design support package as soon as possible.
Thank you for your interest in this circuit.
My pleasure to answer your question and help to solve your question.
The design package is updated on website. Please downloaded from the link below:
Sorry for the inconvenience.
Wish you all the best.
Got the update. Thanks for your help.
Robert A.Stachnik, M/S 183-401| Robert.A.Stachnik@jpl.nasa.gov
Jet Propulsion Laboratory, | Office: (818) 354-1921
4800 Oak Grove Drive, | Cell: (818) 653-8738
Pasadena, CA 91109-8099, USA | FAX: (818) 354-5148
why there are two digital and analog GND joint point? (Such as P4 and P5) And they are not in top or bottom layer,.Is it a mistake?