U-Boot SPL 2021.04-14499-gfcb08e4ed9-dirty (Aug 27 2021 - 05:31:08 +0000) Trying to boot from MMC1 U-Boot 2021.04-14499-gfcb08e4ed9-dirty (Aug 27 2021 - 05:31:08 +0000) CPU: Altera SoCFPGA Platform FPGA: Altera Cyclone V, SE/A6 or SX/C6 or ST/D6, version 0x0 BOOT: SD/MMC Internal Transceiver (3.0V) Watchdog enabled DRAM: 1 GiB MMC: dwmmc0@ff704000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Terasic DE10-Nano Net: Error: ethernet@ff702000 address not set. No ethernet found. Hit any key to stop autoboot: 0 --- Programming FPGA --- 7007204 bytes read in 351 ms (19 MiB/s) switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 233 bytes read in 4 ms (56.6 KiB/s) 1: Cyclone5 SOCDK SDMMC Retrieving file: /extlinux/../zImage 8306440 bytes read in 417 ms (19 MiB/s) append: root=/dev/mmcblk0p3 rootwait rw earlycon console=,115200 Retrieving file: /extlinux/../socfpga_cyclone5_de10_nano_cn0540.dtb 24316 bytes read in 6 ms (3.9 MiB/s) ## Flattened Device Tree blob at 02000000 Booting using the fdt blob at 0x2000000 Loading Device Tree to 09ff7000, end 09fffefb ... OK Starting kernel ... Deasserting all peripheral resets [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.0-yocto-standard-adi (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP Thu Jun 1 14:38:12 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Terasic DE10-Nano [ 0.000000] earlycon: uart0 at MMIO32 0xffc02000 (options '115200n8') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 128 MiB at 0x38000000 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] HighMem [mem 0x0000000030000000-0x000000003fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] percpu: Embedded 19 pages/cpu s45324 r8192 d24308 u77824 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: root=/dev/mmcblk0p3 rootwait rw earlycon console=,115200 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 883944K/1048576K available (13312K kernel code, 1287K rwdata, 7560K rodata, 1024K init, 486K bss, 33560K reserved, 131072K cma-reserved, 131072K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 42236 entries in 83 pages [ 0.000000] ftrace: allocated 83 pages with 4 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 8 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410030c9, AUX_CTRL 0x76460001 [ 0.000000] random: get_random_bytes called from start_kernel+0x39c/0x558 with crng_init=0 [ 0.000000] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000007] sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 21474836475ns [ 0.007978] Switching to timer-based delay loop, resolution 10ns [ 0.014411] Console: colour dummy device 80x30 [ 0.018915] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=1000000) [ 0.029546] pid_max: default: 32768 minimum: 301 [ 0.034337] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.041690] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.050167] CPU: Testing write buffer coherency: ok [ 0.055130] CPU0: Spectre v2: using BPIALL workaround [ 0.060404] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.066720] Setting up static identity map for 0x100000 - 0x100060 [ 0.073095] rcu: Hierarchical SRCU implementation. [ 0.078236] smp: Bringing up secondary CPUs ... [ 0.083533] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.083542] CPU1: Spectre v2: using BPIALL workaround [ 0.094458] smp: Brought up 1 node, 2 CPUs [ 0.098585] SMP: Total of 2 processors activated (400.00 BogoMIPS). [ 0.104924] CPU: All CPU(s) started in SVC mode. [ 0.110107] devtmpfs: initialized [ 0.118513] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.126539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.136377] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.148837] NET: Registered protocol family 16 [ 0.155329] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.163369] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.171436] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.186612] OF: /soc/gpio@ff708000/gpio-controller@0: could not get #gpio-cells for /soc/clkmgr@ffd04000/clocks/sdmmc_clk [ 0.197778] OF: /soc/gpio@ff709000/gpio-controller@0: could not get #gpio-cells for /soc/clkmgr@ffd04000/clocks/sdmmc_clk [ 0.208903] OF: /soc/gpio@ff70a000/gpio-controller@0: could not get #gpio-cells for /soc/clkmgr@ffd04000/clocks/main_pll@40/main_nand_sdmmc_clk@58 [ 0.224598] OF: /soc/gpio@ff708000/gpio-controller@0: could not get #gpio-cells for /soc/clkmgr@ffd04000/clocks/sdmmc_clk [ 0.235718] OF: /soc/gpio@ff709000/gpio-controller@0: could not get #gpio-cells for /soc/clkmgr@ffd04000/clocks/sdmmc_clk [ 0.246821] OF: /soc/gpio@ff70a000/gpio-controller@0: could not get #gpio-cells for /soc/clkmgr@ffd04000/clocks/main_pll@40/main_nand_sdmmc_clk@58 [ 0.273799] debugfs: Directory 'fixed-supply' with parent 'regulator' already present! [ 0.282004] vgaarb: loaded [ 0.285049] SCSI subsystem initialized [ 0.289049] usbcore: registered new interface driver usbfs [ 0.294657] usbcore: registered new interface driver hub [ 0.300045] usbcore: registered new device driver usb [ 0.305309] usb_phy_generic soc:usbphy: supply vcc not found, using dummy regulator [ 0.315340] mc: Linux media interface: v0.10 [ 0.319689] videodev: Linux video capture interface: v2.00 [ 0.325318] pps_core: LinuxPPS API ver. 1 registered [ 0.330324] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.339550] PTP clock support registered [ 0.343791] jesd204: found 0 devices and 0 topologies [ 0.348926] FPGA manager framework [ 0.352449] Advanced Linux Sound Architecture Driver Initialized. [ 0.359669] clocksource: Switched to clocksource timer1 [ 1.038902] NET: Registered protocol family 2 [ 1.043918] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.052354] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.060240] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.067535] TCP: Hash tables configured (established 8192 bind 8192) [ 1.074059] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.080782] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.088057] NET: Registered protocol family 1 [ 1.092966] RPC: Registered named UNIX socket transport module. [ 1.098925] RPC: Registered udp transport module. [ 1.103678] RPC: Registered tcp transport module. [ 1.108407] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.114939] PCI: CLS 0 bytes, default 64 [ 1.119490] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 1.128998] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 1.141572] NFS: Registering the id_resolver key type [ 1.146641] Key type id_resolver registered [ 1.150861] Key type id_legacy registered [ 1.154885] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.161933] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.166484] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.173155] fuse: init (API version 7.32) [ 1.177595] bounce: pool size: 64 pages [ 1.181486] io scheduler mq-deadline registered [ 1.186050] io scheduler kyber registered [ 1.227823] dma-pl330 ffe01000.pdma: Loaded driver for PL330 DMAC-341330 [ 1.234615] dma-pl330 ffe01000.pdma: DBUFF-512x8bytes Num_Chans-8 Num_Peri-32 Num_Events-8 [ 1.246450] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.254027] ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 46, base_baud = 6250000) is a 16550A [ 1.263886] ffc03000.serial1: ttyS1 at MMIO 0xffc03000 (irq = 47, base_baud = 6250000) is a 16550A [ 1.273874] adv7511 0-0039: supply avdd not found, using dummy regulator [ 1.280823] adv7511 0-0039: supply dvdd not found, using dummy regulator [ 1.287616] adv7511 0-0039: supply pvdd not found, using dummy regulator [ 1.294458] adv7511 0-0039: supply bgvdd not found, using dummy regulator [ 1.301375] adv7511 0-0039: supply dvdd-3v not found, using dummy regulator [ 1.309382] adv7511: probe of 0-0039 failed with error -121 [ 1.316358] brd: module loaded [ 1.320917] spi_altera ff30a000.spi: regoff 0, irq 50 [ 1.328034] libphy: Fixed MDIO Bus: probed [ 1.332824] CAN device driver interface [ 1.337010] socfpga-dwmac ff702000.ethernet: IRQ eth_wake_irq not found [ 1.343751] socfpga-dwmac ff702000.ethernet: IRQ eth_lpi not found [ 1.350105] socfpga-dwmac ff702000.ethernet: PTP uses main clock [ 1.356181] socfpga-dwmac ff702000.ethernet: No sysmgr-syscon node found [ 1.362925] socfpga-dwmac ff702000.ethernet: Unable to parse OF data [ 1.369465] socfpga-dwmac: probe of ff702000.ethernet failed with error -524 [ 1.376797] stmmaceth ff702000.ethernet: IRQ eth_wake_irq not found [ 1.383149] stmmaceth ff702000.ethernet: IRQ eth_lpi not found [ 1.389142] stmmaceth ff702000.ethernet: PTP uses main clock [ 1.395037] stmmaceth ff702000.ethernet: Version ID not available [ 1.401180] stmmaceth ff702000.ethernet: DWMAC1000 [ 1.406084] stmmaceth ff702000.ethernet: DMA HW capability register supported [ 1.413278] stmmaceth ff702000.ethernet: RX Checksum Offload Engine supported [ 1.420455] stmmaceth ff702000.ethernet: COE Type 2 [ 1.425321] stmmaceth ff702000.ethernet: TX Checksum insertion supported [ 1.432013] stmmaceth ff702000.ethernet: Enhanced/Alternate descriptors [ 1.438599] stmmaceth ff702000.ethernet: Extended descriptors not supported [ 1.445549] stmmaceth ff702000.ethernet: Ring mode enabled [ 1.451048] stmmaceth ff702000.ethernet: device MAC address 1e:16:4b:b4:0e:61 [ 1.466641] libphy: stmmac: probed [ 1.470091] Micrel KSZ9031 Gigabit PHY stmmac-0:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) [ 1.484161] usbcore: registered new interface driver asix [ 1.489641] usbcore: registered new interface driver ax88179_178a [ 1.495784] usbcore: registered new interface driver cdc_ether [ 1.501642] usbcore: registered new interface driver net1080 [ 1.507384] usbcore: registered new interface driver cdc_subset [ 1.513397] usbcore: registered new interface driver zaurus [ 1.519052] usbcore: registered new interface driver cdc_ncm [ 1.525404] dwc2 ffb40000.usb: supply vusb_d not found, using dummy regulator [ 1.532734] dwc2 ffb40000.usb: supply vusb_a not found, using dummy regulator [ 1.540199] dwc2 ffb40000.usb: EPs: 16, dedicated fifos, 8064 entries in SPRAM [ 1.547931] dwc2 ffb40000.usb: DWC OTG Controller [ 1.552749] dwc2 ffb40000.usb: new USB bus registered, assigned bus number 1 [ 1.559909] dwc2 ffb40000.usb: irq 48, io mem 0xffb40000 [ 1.565440] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 1.573802] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.581098] usb usb1: Product: DWC OTG Controller [ 1.585853] usb usb1: Manufacturer: Linux 5.10.0-yocto-standard-adi dwc2_hsotg [ 1.593154] usb usb1: SerialNumber: ffb40000.usb [ 1.598337] hub 1-0:1.0: USB hub found [ 1.602182] hub 1-0:1.0: 1 port detected [ 1.607076] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.613673] ehci-pci: EHCI PCI platform driver [ 1.618746] usbcore: registered new interface driver uas [ 1.624216] usbcore: registered new interface driver usb-storage [ 1.630366] usbcore: registered new interface driver usbserial_generic [ 1.636973] usbserial: USB Serial support registered for generic [ 1.643086] usbcore: registered new interface driver ftdi_sio [ 1.648904] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.656359] usbcore: registered new interface driver upd78f0730 [ 1.662326] usbserial: USB Serial support registered for upd78f0730 [ 1.670185] i2c /dev entries driver [ 1.674619] usbcore: registered new interface driver uvcvideo [ 1.680422] USB Video Class driver (1.1.1) [ 1.686642] Synopsys Designware Multimedia Card Interface Driver [ 1.693272] ledtrig-cpu: registered to indicate activity on CPUs [ 1.693277] dw_mmc ff704000.dwmmc0: IDMAC supports 32-bit address mode. [ 1.693366] dw_mmc ff704000.dwmmc0: Using internal DMA controller. [ 1.699470] usbcore: registered new interface driver usbhid [ 1.706030] dw_mmc ff704000.dwmmc0: Version ID is 240a [ 1.712272] usbhid: USB HID core driver [ 1.717935] dw_mmc ff704000.dwmmc0: DW MMC controller at irq 43,32 bit host data width,1024 deep fifo [ 1.727119] mmc_host mmc0: card is polling. [ 1.749090] axi_sysid ff218000.axi-sysid-0: AXI System ID core version (1.01.a) found [ 1.753130] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 1.757324] axi_sysid ff218000.axi-sysid-0: [cn0540] on [de10nano] git branch git clean [2023-06-04 02:04:09] UTC [ 1.782526] fpga_manager fpga0: Altera SOCFPGA FPGA Manager registered [ 1.790074] usbcore: registered new interface driver snd-usb-audio [ 1.798683] NET: Registered protocol family 10 [ 1.804173] Segment Routing with IPv6 [ 1.807943] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.814522] NET: Registered protocol family 17 [ 1.819054] NET: Registered protocol family 15 [ 1.823726] can: controller area network core [ 1.828182] NET: Registered protocol family 29 [ 1.832687] can: raw protocol [ 1.835662] can: broadcast manager protocol [ 1.839893] can: netlink gateway - max_hops=1 [ 1.844421] 8021q: 802.1Q VLAN Support v1.8 [ 1.848692] NET: Registered protocol family 36 [ 1.853218] Key type dns_resolver registered [ 1.857815] oprofile: using arm/armv7-ca9 [ 1.861947] ThumbEE CPU extension supported. [ 1.866275] Registering SWP/SWPB emulation handler [ 1.876076] of_cfs_init [ 1.878572] of_cfs_init: OK [ 1.881639] ALSA device list: [ 1.884664] No soundcards found. [ 1.888112] Warning: unable to open an initial console. [ 1.893501] Waiting for root device /dev/mmcblk0p3... [ 1.912093] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.921972] mmc0: new high speed SDHC card at address aaaa [ 1.928108] mmcblk0: mmc0:aaaa SA08G 7.40 GiB [ 1.935714] mmcblk0: p1 p2 p3 [ 1.977997] random: fast init done [ 2.037706] EXT4-fs (mmcblk0p3): recovery complete [ 2.043892] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.052054] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 2.059447] devtmpfs: mounted [ 2.065859] Freeing unused kernel memory: 1024K [ 2.070982] Run /sbin/init as init process [ 2.428587] systemd[1]: System time before build time, advancing clock. [ 2.487915] systemd[1]: systemd 253.1^ running in system mode (-PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 2.520522] systemd[1]: Detected architecture arm. [ 2.563895] systemd[1]: Hostname set to . [ 2.698693] systemd-sysv-generator[70]: SysV service '/etc/init.d/halt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.724483] systemd-sysv-generator[70]: SysV service '/etc/init.d/sendsigs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.749363] systemd-sysv-generator[70]: SysV service '/etc/init.d/reboot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.780371] systemd-sysv-generator[70]: SysV service '/etc/init.d/alignment.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.807151] systemd-sysv-generator[70]: SysV service '/etc/init.d/umountnfs.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.832199] systemd-sysv-generator[70]: SysV service '/etc/init.d/umountfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.861860] systemd-sysv-generator[70]: SysV service '/etc/init.d/save-rtc.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.887611] systemd-sysv-generator[70]: SysV service '/etc/init.d/sshd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.912851] systemd-sysv-generator[70]: SysV service '/etc/init.d/single' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.485824] systemd[1]: Queued start job for default target Multi-User System. [ 3.497996] systemd[1]: Created slice Slice /system/getty. [ 3.505263] systemd[1]: Created slice Slice /system/modprobe. [ 3.512582] systemd[1]: Created slice Slice /system/serial-getty. [ 3.519507] systemd[1]: Created slice User and Session Slice. [ 3.525940] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.534350] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.542659] systemd[1]: Reached target Path Units. [ 3.547757] systemd[1]: Reached target Remote File Systems. [ 3.553601] systemd[1]: Reached target Slice Units. [ 3.558790] systemd[1]: Reached target Swaps. [ 3.566106] systemd[1]: Listening on Syslog Socket. [ 3.571688] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.591081] systemd[1]: Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit). [ 3.602954] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.609963] systemd[1]: Listening on Journal Socket. [ 3.616208] systemd[1]: Listening on Network Service Netlink Socket. [ 3.623791] systemd[1]: Listening on udev Control Socket. [ 3.630116] systemd[1]: Listening on udev Kernel Socket. [ 3.636367] systemd[1]: Listening on User Database Manager Socket. [ 3.643458] systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 3.656968] systemd[1]: POSIX Message Queue File System was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/mqueue). [ 3.673779] systemd[1]: Mounting Kernel Debug File System... [ 3.683617] systemd[1]: Mounting Kernel Trace File System... [ 3.695495] systemd[1]: Mounting Temporary Directory /tmp... [ 3.702546] systemd[1]: Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/5.10.0-yocto-standard-adi/modules.devname). [ 3.724059] systemd[1]: Starting Load Kernel Module configfs... [ 3.735480] systemd[1]: Starting Load Kernel Module drm... [ 3.746522] systemd[1]: Starting Load Kernel Module fuse... [ 3.753163] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). [ 3.767086] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 3.780010] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 3.791580] systemd[1]: Starting Journal Service... [ 3.800022] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met. [ 3.813560] systemd[1]: Starting Generate network units from Kernel command line... [ 3.826250] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.838194] systemd[1]: Starting Apply Kernel Variables... [ 3.858214] systemd[1]: Starting Coldplug All udev Devices... [ 3.907512] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [ 3.932306] systemd[1]: Mounted Kernel Debug File System. [ 3.945241] systemd[1]: Mounted Kernel Trace File System. [ 3.951922] systemd[1]: Mounted Temporary Directory /tmp. [ 3.953448] systemd-journald[78]: Collecting audit messages is disabled. [ 3.966111] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 3.974341] systemd[1]: Finished Load Kernel Module configfs. [ 3.982184] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 4.000052] systemd[1]: Finished Load Kernel Module drm. [ 4.007252] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 4.030955] systemd[1]: Finished Load Kernel Module fuse. [ 4.049886] systemd[1]: Finished Generate network units from Kernel command line. [ 4.058910] systemd[1]: Finished Remount Root and Kernel File Systems. [ 4.081320] systemd[1]: Finished Apply Kernel Variables. [ 4.088255] systemd[1]: Reached target Preparation for Network. [ 4.114731] systemd[1]: Mounting FUSE Control File System... [ 4.133396] systemd[1]: Mounting Kernel Configuration File System... [ 4.152761] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc). [ 4.180588] systemd[1]: Create System Users was skipped because no trigger condition checks were met. [ 4.194046] systemd[1]: Starting Create Static Device Nodes in /dev... [ 4.208609] systemd[1]: Started Journal Service. [ 4.299398] systemd-journald[78]: Received client request to flush runtime journal. [ 5.393829] stmmaceth ff702000.ethernet end0: renamed from eth0 [ 6.483318] systemd-journald[78]: Oldest entry in /run/log/journal/cac13421fe074691851dd5ea354c17ad/system.journal is older than the configured file retention duration (1month), suggesting rotation. [ 6.582611] systemd-journald[78]: /run/log/journal/cac13421fe074691851dd5ea354c17ad/system.journal: Journal header limits reached or header out-of-date, rotating. [ 7.038792] stmmaceth ff702000.ethernet end0: PHY [stmmac-0:01] driver [Micrel KSZ9031 Gigabit PHY] (irq=POLL) [ 7.067574] stmmaceth ff702000.ethernet end0: No Safety Features support found [ 7.077191] stmmaceth ff702000.ethernet end0: registered PTP clock [ 7.101348] stmmaceth ff702000.ethernet end0: configuring for phy/rgmii link mode [ 7.260369] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 7.328287] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 8.149704] random: crng init done