U-Boot 2021.04 (Aug 27 2021 - 05:31:08 +0000) CPU: Altera SoCFPGA Platform FPGA: Altera Cyclone V, SE/A6 or SX/C6 or ST/D6, version 0x0 BOOT: SD/MMC Internal Transceiver (3.0V) Watchdog enabled DRAM: 1 GiB MMC: dwmmc0@ff704000: 0 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Terasic DE10-Nano Net: Error: ethernet@ff702000 address not set. No ethernet found. Hit any key to stop autoboot: 0 --- Programming FPGA --- 7007204 bytes read in 397 ms (16.8 MiB/s) switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 233 bytes read in 6 ms (37.1 KiB/s) 1: Cyclone5 SOCDK SDMMC Retrieving file: /extlinux/../zImage 7244704 bytes read in 426 ms (16.2 MiB/s) append: root=/dev/mmcblk0p3 rootwait rw earlycon console=,115200 Retrieving file: /extlinux/../socfpga_cyclone5_de10_nano_cn0540.dtb 22791 bytes read in 9 ms (2.4 MiB/s) ## Flattened Device Tree blob at 02000000 Booting using the fdt blob at 0x2000000 Loading Device Tree to 09ff7000, end 09fff906 ... OK Starting kernel ... Deasserting all peripheral resets [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.0-yocto-standard-adi (oe-user@oe-host) (gcc version 12.2.0 (GCC)) #1 SMP Fri Mar 10 15:52:30 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Terasic DE10-Nano [ 0.000000] earlycon: uart0 at MMIO32 0xffc02000 (options '115200n8') [ 0.000000] bootconsole [uart0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 128 MiB at 0x38000000 [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x488 with crng_init=0 [ 0.000000] percpu: Embedded 16 pages/cpu @(ptrval) s36812 r8192 d20532 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608 [ 0.000000] Kernel command line: root=/dev/mmcblk0p3 rootwait rw earlycon console=,115200 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 886248K/1048576K available (11264K kernel code, 1086K rwdata, 6412K rodata, 1024K init, 460K bss, 31256K reserved, 131072K cma-reserved, 131072K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (12256 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) (1087 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 461 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 36787 entries in 108 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 8 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB [ 0.000000] L2C-310: CACHE_ID 0x410030c9, AUX_CTRL 0x76460001 [ 0.000000] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.000006] sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 21474836475ns [ 0.008036] Switching to timer-based delay loop, resolution 10ns [ 0.014366] Console: colour dummy device 80x30 [ 0.018892] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=1000000) [ 0.029589] pid_max: default: 32768 minimum: 301 [ 0.034407] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.041018] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.048549] CPU: Testing write buffer coherency: ok [ 0.053534] CPU0: Spectre v2: using BPIALL workaround [ 0.058778] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.065090] Setting up static identity map for 0x100000 - 0x100060 [ 0.071514] rcu: Hierarchical SRCU implementation. [ 0.076912] smp: Bringing up secondary CPUs ... [ 0.082178] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.082184] CPU1: Spectre v2: using BPIALL workaround [ 0.093139] smp: Brought up 1 node, 2 CPUs [ 0.097282] SMP: Total of 2 processors activated (400.00 BogoMIPS). [ 0.103638] CPU: All CPU(s) started in SVC mode. [ 0.109288] devtmpfs: initialized [ 0.117305] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.125162] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.134990] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.147013] NET: Registered protocol family 16 [ 0.153336] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.161400] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.169521] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.200684] fixed-supply: Failed to create debugfs directory [ 0.206762] vgaarb: loaded [ 0.209818] SCSI subsystem initialized [ 0.213929] usbcore: registered new interface driver usbfs [ 0.219548] usbcore: registered new interface driver hub [ 0.225009] usbcore: registered new device driver usb [ 0.230309] usb_phy_generic soc:usbphy: soc:usbphy supply vcc not found, using dummy regulator [ 0.239118] usb_phy_generic soc:usbphy: Linked as a consumer to regulator.0 [ 0.246806] media: Linux media interface: v0.10 [ 0.251490] videodev: Linux video capture interface: v2.00 [ 0.257169] pps_core: LinuxPPS API ver. 1 registered [ 0.262227] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.271516] PTP clock support registered [ 0.275823] jesd204: found 0 devices and 0 topologies [ 0.281035] FPGA manager framework [ 0.284594] Advanced Linux Sound Architecture Driver Initialized. [ 0.291814] clocksource: Switched to clocksource timer1 [ 0.357974] NET: Registered protocol family 2 [ 0.363166] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.370949] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.378219] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.384879] TCP: Hash tables configured (established 8192 bind 8192) [ 0.391429] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.397485] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.404105] NET: Registered protocol family 1 [ 0.408944] RPC: Registered named UNIX socket transport module. [ 0.414975] RPC: Registered udp transport module. [ 0.419754] RPC: Registered tcp transport module. [ 0.424538] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.431702] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available [ 0.441883] workingset: timestamp_bits=30 max_order=18 bucket_order=0 [ 0.456428] NFS: Registering the id_resolver key type [ 0.461567] Key type id_resolver registered [ 0.465842] Key type id_legacy registered [ 0.469917] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.477267] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.481986] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.491926] bounce: pool size: 64 pages [ 0.495820] io scheduler noop registered (default) [ 0.500676] io scheduler mq-deadline registered [ 0.505430] io scheduler kyber registered [ 0.518967] dma-pl330 ffe01000.pdma: Loaded driver for PL330 DMAC-341330 [ 0.525919] dma-pl330 ffe01000.pdma: DBUFF-512x8bytes Num_Chans-8 Num_Peri-32 Num_Events-8 [ 0.538596] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.546405] ffc02000.serial0: ttyS0 at MMIO 0xffc02000 (irq = 38, base_baud = 6250000) is a 16550A [ 0.556205] ffc03000.serial1: ttyS1 at MMIO 0xffc03000 (irq = 39, base_baud = 6250000) is a 16550A [ 0.567410] brd: module loaded [ 0.572392] spi_altera ff30a000.altera_spi: base (ptrval), irq 41 [ 0.579959] libphy: Fixed MDIO Bus: probed [ 0.584948] CAN device driver interface [ 0.589388] socfpga-dwmac ff702000.ethernet: PTP uses main clock [ 0.595785] socfpga-dwmac ff702000.ethernet: Version ID not available [ 0.602358] socfpga-dwmac ff702000.ethernet: DWMAC1000 [ 0.607651] socfpga-dwmac ff702000.ethernet: DMA HW capability register supported [ 0.615289] socfpga-dwmac ff702000.ethernet: RX Checksum Offload Engine supported [ 0.622904] socfpga-dwmac ff702000.ethernet: COE Type 2 [ 0.628210] socfpga-dwmac ff702000.ethernet: TX Checksum insertion supported [ 0.635369] socfpga-dwmac ff702000.ethernet: Enhanced/Alternate descriptors [ 0.642432] socfpga-dwmac ff702000.ethernet: Extended descriptors not supported [ 0.649829] socfpga-dwmac ff702000.ethernet: Ring mode enabled [ 0.663553] libphy: stmmac: probed [ 0.667016] Micrel KSZ9031 Gigabit PHY stmmac-0:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) [ 0.680956] usbcore: registered new interface driver asix [ 0.686499] usbcore: registered new interface driver ax88179_178a [ 0.692734] usbcore: registered new interface driver cdc_ether [ 0.698701] usbcore: registered new interface driver net1080 [ 0.704489] usbcore: registered new interface driver cdc_subset [ 0.710539] usbcore: registered new interface driver zaurus [ 0.716276] usbcore: registered new interface driver cdc_ncm [ 0.722730] dwc2 ffb40000.usb: ffb40000.usb supply vusb_d not found, using dummy regulator [ 0.731187] dwc2 ffb40000.usb: Linked as a consumer to regulator.0 [ 0.737497] dwc2 ffb40000.usb: ffb40000.usb supply vusb_a not found, using dummy regulator [ 0.746040] dwc2 ffb40000.usb: dwc2_check_params: Invalid parameter lpm=1 [ 0.752951] dwc2 ffb40000.usb: dwc2_check_params: Invalid parameter lpm_clock_gating=1 [ 0.760972] dwc2 ffb40000.usb: dwc2_check_params: Invalid parameter besl=1 [ 0.767942] dwc2 ffb40000.usb: dwc2_check_params: Invalid parameter hird_threshold_en=1 [ 0.776090] dwc2 ffb40000.usb: EPs: 16, dedicated fifos, 8064 entries in SPRAM [ 0.784110] dwc2 ffb40000.usb: DWC OTG Controller [ 0.788907] dwc2 ffb40000.usb: new USB bus registered, assigned bus number 1 [ 0.796128] dwc2 ffb40000.usb: irq 40, io mem 0xffb40000 [ 0.801696] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.810138] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.817483] usb usb1: Product: DWC OTG Controller [ 0.822249] usb usb1: Manufacturer: Linux 4.19.0-yocto-standard-adi dwc2_hsotg [ 0.829569] usb usb1: SerialNumber: ffb40000.usb [ 0.834787] hub 1-0:1.0: USB hub found [ 0.838615] hub 1-0:1.0: 1 port detected [ 0.843370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.849994] ehci-pci: EHCI PCI platform driver [ 0.855040] usbcore: registered new interface driver uas [ 0.860503] usbcore: registered new interface driver usb-storage [ 0.866722] usbcore: registered new interface driver usbserial_generic [ 0.873399] usbserial: USB Serial support registered for generic [ 0.879527] usbcore: registered new interface driver ftdi_sio [ 0.885403] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.892935] usbcore: registered new interface driver upd78f0730 [ 0.898991] usbserial: USB Serial support registered for upd78f0730 [ 0.907164] i2c /dev entries driver [ 0.911485] usbcore: registered new interface driver uvcvideo [ 0.917373] USB Video Class driver (1.1.1) [ 0.923541] Synopsys Designware Multimedia Card Interface Driver [ 0.930054] dw_mmc ff704000.dwmmc0: IDMAC supports 32-bit address mode. [ 0.936810] dw_mmc ff704000.dwmmc0: Using internal DMA controller. [ 0.943117] dw_mmc ff704000.dwmmc0: Version ID is 240a [ 0.948376] dw_mmc ff704000.dwmmc0: DW MMC controller at irq 33,32 bit host data width,1024 deep fifo [ 0.957687] mmc_host mmc0: card is polling. [ 0.974554] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 0.997323] ledtrig-cpu: registered to indicate activity on CPUs [ 1.003561] usbcore: registered new interface driver usbhid [ 1.009120] usbhid: USB HID core driver [ 1.015084] ad7768-1 spi1.0: Linked as a consumer to regulator.2 [ 1.024077] ltc2308 spi0.0: Linked as a consumer to regulator.1 [ 1.036431] fpga_manager fpga0: Altera SOCFPGA FPGA Manager registered [ 1.043809] altera_hps2fpga_bridge ff400000.fpga_bridge: fpga bridge [lwhps2fpga] registered [ 1.052524] altera_hps2fpga_bridge ff500000.fpga_bridge: fpga bridge [hps2fpga] registered [ 1.061655] usbcore: registered new interface driver snd-usb-audio [ 1.070454] oprofile: using arm/armv7-ca9 [ 1.075502] NET: Registered protocol family 10 [ 1.080899] Segment Routing with IPv6 [ 1.084746] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.091356] NET: Registered protocol family 17 [ 1.095939] NET: Registered protocol family 15 [ 1.100817] can: controller area network core (rev 20170425 abi 9) [ 1.107199] NET: Registered protocol family 29 [ 1.111648] can: raw protocol (rev 20170425) [ 1.115970] can: broadcast manager protocol (rev 20170425 t) [ 1.121623] can: netlink gateway (rev 20170425) max_hops=1 [ 1.127405] 8021q: 802.1Q VLAN Support v1.8 [ 1.131638] NET: Registered protocol family 36 [ 1.136128] Key type dns_resolver registered [ 1.140460] ThumbEE CPU extension supported. [ 1.144737] Registering SWP/SWPB emulation handler [ 1.154383] adv7511 0-0039: 0-0039 supply avdd not found, using dummy regulator [ 1.161723] adv7511 0-0039: Linked as a consumer to regulator.0 [ 1.167673] adv7511 0-0039: 0-0039 supply dvdd not found, using dummy regulator [ 1.175033] adv7511 0-0039: 0-0039 supply pvdd not found, using dummy regulator [ 1.182511] adv7511 0-0039: 0-0039 supply bgvdd not found, using dummy regulator [ 1.190057] adv7511 0-0039: 0-0039 supply dvdd-3v not found, using dummy regulator [ 1.198259] adv7511: probe of 0-0039 failed with error -121 [ 1.205289] ad5064 1-0010: Linked as a consumer to regulator.2 [ 1.212508] of_cfs_init [ 1.215031] of_cfs_init: OK [ 1.218117] ALSA device list: [ 1.221116] No soundcards found. [ 1.224622] Warning: unable to open an initial console. [ 1.230071] Waiting for root device /dev/mmcblk0p3... [ 1.260614] mmc0: Problem switching card into high-speed mode! [ 1.266557] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 25000000Hz, actual 25000000HZ div = 1) [ 1.276535] mmc0: new SDHC card at address 0001 [ 1.282094] mmcblk0: mmc0:0001 00000 7.26 GiB [ 1.288879] mmcblk0: p1 p2 p3 [ 1.350715] random: fast init done [ 1.519216] EXT4-fs (mmcblk0p3): recovery complete [ 1.530902] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 1.539171] VFS: Mounted root (ext4 filesystem) on device 179:3. [ 1.545373] devtmpfs: mounted [ 1.552546] Freeing unused kernel memory: 1024K [ 1.557517] Run /sbin/init as init process [ 2.247963] systemd[1]: System time before build time, advancing clock. [ 2.312814] random: systemd: uninitialized urandom read (16 bytes read) [ 2.331456] systemd[1]: systemd 253.1^ running in system mode (-PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) [ 2.363821] systemd[1]: Detected architecture arm. [ 2.375240] systemd[1]: Hostname set to . [ 2.414214] random: (sd-executor): uninitialized urandom read (16 bytes read) [ 2.510231] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read) [ 2.557021] systemd-sysv-generator[1183]: SysV service '/etc/init.d/reboot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.582098] systemd-sysv-generator[1183]: SysV service '/etc/init.d/sshd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.612915] systemd-sysv-generator[1183]: SysV service '/etc/init.d/sendsigs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.637690] systemd-sysv-generator[1183]: SysV service '/etc/init.d/halt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.665000] systemd-sysv-generator[1183]: SysV service '/etc/init.d/single' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.691080] systemd-sysv-generator[1183]: SysV service '/etc/init.d/umountnfs.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.716281] systemd-sysv-generator[1183]: SysV service '/etc/init.d/umountfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.741444] systemd-sysv-generator[1183]: SysV service '/etc/init.d/save-rtc.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 2.766588] systemd-sysv-generator[1183]: SysV service '/etc/init.d/alignment.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 3.485941] systemd[1]: Queued start job for default target Multi-User System. [ 3.497988] systemd[1]: Created slice Slice /system/getty. [ 3.505311] systemd[1]: Created slice Slice /system/modprobe. [ 3.512705] systemd[1]: Created slice Slice /system/serial-getty. [ 3.519793] systemd[1]: Created slice User and Session Slice. [ 3.526176] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.534576] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.542809] systemd[1]: Reached target Path Units. [ 3.547874] systemd[1]: Reached target Remote File Systems. [ 3.553673] systemd[1]: Reached target Slice Units. [ 3.558842] systemd[1]: Reached target Swaps. [ 3.566698] systemd[1]: Listening on Syslog Socket. [ 3.572319] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.597157] systemd[1]: Journal Audit Socket was skipped because of an unmet condition check (ConditionSecurity=audit). [ 3.609096] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.616068] systemd[1]: Listening on Journal Socket. [ 3.622356] systemd[1]: Listening on Network Service Netlink Socket. [ 3.629864] systemd[1]: Listening on udev Control Socket. [ 3.636153] systemd[1]: Listening on udev Kernel Socket. [ 3.642464] systemd[1]: Listening on User Database Manager Socket. [ 3.649469] systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 3.663048] systemd[1]: POSIX Message Queue File System was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/mqueue). [ 3.679886] systemd[1]: Mounting Kernel Debug File System... [ 3.689692] systemd[1]: Mounting Kernel Trace File System... [ 3.701652] systemd[1]: Mounting Temporary Directory /tmp... [ 3.708791] systemd[1]: Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/4.19.0-yocto-standard-adi/modules.devname). [ 3.730461] systemd[1]: Starting Load Kernel Module configfs... [ 3.742042] systemd[1]: Starting Load Kernel Module drm... [ 3.753190] systemd[1]: Starting Load Kernel Module fuse... [ 3.759578] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). [ 3.773581] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 3.786687] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 3.798222] systemd[1]: Starting Journal Service... [ 3.814219] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met. [ 3.828420] systemd[1]: Starting Generate network units from Kernel command line... [ 3.841935] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.854275] systemd[1]: Starting Apply Kernel Variables... [ 3.860826] systemd-journald[1191]: Collecting audit messages is disabled. [ 3.873128] systemd[1]: Starting Coldplug All udev Devices... [ 3.913474] systemd[1]: Mounted Kernel Debug File System. [ 3.923632] systemd[1]: Mounted Kernel Trace File System. [ 3.930329] systemd[1]: Mounted Temporary Directory /tmp. [ 3.953941] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 3.962271] systemd[1]: Finished Load Kernel Module configfs. [ 3.966032] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [ 3.980262] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 3.988258] systemd[1]: Finished Load Kernel Module drm. [ 3.995977] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 4.003687] systemd[1]: Finished Load Kernel Module fuse. [ 4.011035] systemd[1]: Finished Generate network units from Kernel command line. [ 4.020402] systemd[1]: Finished Remount Root and Kernel File Systems. [ 4.028861] systemd[1]: Finished Apply Kernel Variables. [ 4.035321] systemd[1]: Started Journal Service. [ 4.115777] systemd-journald[1191]: Received client request to flush runtime journal. [ 4.875814] socfpga-dwmac ff702000.ethernet end1: renamed from eth0 [ 5.854060] socfpga-dwmac ff702000.ethernet end1: device MAC address b2:21:5c:0d:2a:d2 [ 5.968006] Micrel KSZ9031 Gigabit PHY stmmac-0:01: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) [ 6.002064] socfpga-dwmac ff702000.ethernet end1: No Safety Features support found [ 6.011217] socfpga-dwmac ff702000.ethernet end1: registered PTP clock [ 6.018466] IPv6: ADDRCONF(NETDEV_UP): end1: link is not ready [ 9.112728] socfpga-dwmac ff702000.ethernet end1: Link is Up - 1Gbps/Full - flow control off [ 9.121355] IPv6: ADDRCONF(NETDEV_CHANGE): end1: link becomes ready