MAX9972: FAQ

Was this helpful?

MAX9972: Dissipation and DUT Current

The power dissipation is about 1.5W: What’s the relationship between the dissipation and DUT current? E.g., if the DUT current is 40mA, what is the dissipation--still 1.5W or higher? The power dissipation…
MAX9972: FAQ Leakage Current

Will the leakage current on one channel of MAX9972 be ‘seen’ on the other driver channels? Yes. But it is very minimal (in few uA kind of range) and can be reduced to nA range by putting device in low…
MAX9972: FAQ Pins

In MAX9972/MAX9005, if PMU switches are not used, what should be the state of related pins (FORCE_, SENSE_, and PMU_)? It is recommended to connect these pins to GND.
MAX9972: FAQ Voltage Rail

ATE driver IC, for example, MAX9972 drive current is more than +/-40mA: We know the voltage of DUT is set by DLV/DHV/DTV. Then which voltage rail will supply the current? DLV/DHV/DTV or VDD/VSS? …

Forums