Serial port I/O

Question

Hi All. 
 I am designing a low power audio system with the intention of using an ADAU1777 with a MAX98390. 
 I notice the ADAU1777 has only one serial port but I was unsure if it could support full duplex on I2S for input to the ADAU and then output to the MAX98390 from the ADAU1777 or if it could do I2S input, and then TDM output on the 7 available MPx pins. 
 Many Thanks!

DaveThib · Accepted Answer

Hello Hayashiiiii, 
 There is only one serial port and one set of clock pins. So the problem is that you cannot have the serial input be I2S and the output be TDM. Because the bit clock is different for both of them. 
 So if you need to input or output more than two channels you will have to set it to TDM mode and both input and output will be in the same mode. 
 
 Dave T)

SLA Status	Assignee	Support Status
SLA Closed. Missed after 93 hours	Toshita_Khandare AndrewWhyte galvinpjg	Closed

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

SLA Information

Products Mentioned

Associated Drivers

Thread Details

Serial port I/O

Before You Switch