Can I get Linux support for the SSM2603?

Hello Lars,

Thank you for your reply.

I bought "Zybo-z7-10" to solve this problem.

The kernel 4.9 included with petalinux was used.

I thought there might be a problem with the ALSA configuration.

But the cause of the problem was elsewhere.

I found that the ssm2602 driver provided by ADI does not work with kernel 4.9.

The ADI should be informed on the SSM2603 page.

I had to waste weeks because of this problem.

Applying the patch below fixes the problem.

ASoC: ssm2602: Replace reg_default_raw with reg_default - Patchwork 

Regards,

Namio

Hello Lars,

Thank you for your reply.

I bought "Zybo-z7-10" to solve this problem.

The kernel 4.9 included with petalinux was used.

I thought there might be a problem with the ALSA configuration.

But the cause of the problem was elsewhere.

I found that the ssm2602 driver provided by ADI does not work with kernel 4.9.

The ADI should be informed on the SSM2603 page.

I had to waste weeks because of this problem.

Applying the patch below fixes the problem.

ASoC: ssm2602: Replace reg_default_raw with reg_default - Patchwork 

Regards,

Namio