SHARC Bare Metal SDK Update Timeline and SAM Audio Starter SDK

Hi Chris, both audio starter and BareMetal framework are good choices for audio projects in my opinion. audio starter has better connectivity support, like ethernet, usb, shell etc whereas the baremetal framework is more traditional audio processing architecture. If you are new to SHARC processors, baremetal FW should fit in more. The new SAM Rev 2.1 is slightly different from SAM Rev 1.x in audio clock source and ethernet PHY. the baremetal FW doesn't support PHY so the software change is pretty minimal to run on new SAM. The baremetal FW for SAM Rev 2.1 is on the way but needs time to be released. You may update the current baremetal framework to adapt to hardware changes with our guidance. If you would like to proceed with this approach, let us know.

Hi lliu ,

I appreciate your response.  Yes, I would certainly like to proceed with updating the SHARC baremetal framework per the SAM rev 1.5 to 2.1 hardware changes, with your team's guidance.  

Let us know if you have updates or instructions - and I assume that information will be presented publicly.  My email, just in case it is needed is:  chrislanderson1973@gmail.com.

Thank you,

Chris

Hi lliu ,

I appreciate your response.  Yes, I would certainly like to proceed with updating the SHARC baremetal framework per the SAM rev 1.5 to 2.1 hardware changes, with your team's guidance.  

Let us know if you have updates or instructions - and I assume that information will be presented publicly.  My email, just in case it is needed is:  chrislanderson1973@gmail.com.

Thank you,

Chris