SigmaStudio Network Utility for Linux seems to be outdated

Hi,

Which version of SigmaStudio are you using?

- Lars

SigmaStudio 3.13.

As I am a Linux user, I run SigmaStudio in Windows under VirtualBox.  It works just great with FreeUSBi.  What I would like to achieve, is to get this working with Arduino communicating over serial from the Linux side.  Only missing piece is the  program for Linux which handles the communication from SigmaStudio over TCP and forwards that to Arduino for I2C.  I have some working code written in Python.  I can decode all writing packets correctly, they match the data which is written by FreeUSBi.  Only missing part is the reading packet format.  The format I have seen documented doesn't work.

If I will get this working, I'll put my code, both Python script and the Arduino sketch available for anyone to use.

Hi,

OK, this is more about the protocol documentation of the SigmaStudio TCP block rather than the SigmaStudio Network Utility for Linux itself?

- Lars

Moving this back to the audio section for feedback on how the format has changed.

Yes and no and both.  Clearly SigmaStudio Network Utility for Linux doesn't work as.  If it did, I could deduce the protocol from it.  And the two communicate with each other so they should be in sync.  And this would be very useful because it would make it much easier to implement in device development.  In ideal case, if the device has Linux or any CPU with real time communication to a supporting Linux machine, no extra hardware would be necessary.