MEMS mics: FAQ

  • Created
Was this helpful?
  • Article

    Can MEMS mics be soldered to a flex PCB?

    Yes, a flex PCB can be used with MEMS microphones. All of our microphones are actually available on flex PCB evaluation boards so that they can be easily placed in your own system for testing. Handling…
  • Article

    Interesting microphone application - "Acoustic telescope"

    Interesting microphone application - "Acoustic telescope" by JeradL I came across this DesignNews Gadget Freak article last week. This shows a design using an ADMP504 low-noise microphone paired with…
  • Article

    Is a microphone with higher sensitivity better than one with lower sensitivity?

    Not necessarily. The optimal sensitivity depends on your application and design constraints. Most analog mics have a sensitivity between -42 and -35 dBV. This Analog Dialogue article explains the difference…
  • Article

    MEMS microphone IBIS models

    MEMS microphone IBIS models by JeradL IBIS models are now available for our MEMS microphones with digital interfaces - the ADMP421 , ADMP521 , and ADMP441 . You can download these models through this…
  • Article

    New MEMS microphone products

    New MEMS microphone products by JeradL We have recently released four new MEMS microphones, so I want to make sure that everyone is aware of them and highlight the key features of each. ADMP621 This…

Before You Switch

Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.